Disclaimer: features differ based on Subscription Plan
Passengers can be assigned to the unit only automatically. The automatic identification method requires appropriate equipment. To work with passenger traffic, RFID tags are widely used. When getting on or getting off the vehicle, the passenger applies an RFID tag to a special reader.
For automatic assignment and separation of passengers, special adjustments in the system are required:
Create the sensor of the Passenger sensor type in the properties of each unit to which the trailer is supposed to be assigned automatically. You can use the avl_driver parameter for this sensor or any other parameter depending on your equipment and its configuration.
Create an automatic assignment list. To do so, click on the Automatic assignment icon ( ) and follow the steps described below.
After clicking on the Automatic assignment icon, a list of available resources opens. Verify that you have access rights to the user that is the creator of the resource, otherwise, a warning will be displayed.
Here you choose a resource whose passengers will be used in automatic assignment (with the units selected in the next dialog box). In order to understand what passengers belong to a particular resource, go back to the Passengers panel and apply a filter by resource (a drop-down list to the right of the Create button).
After choosing a resource, click Next. If only one resource is available, then it will be selected automatically.
The next dialog box contains a list of units to which passengers can be assigned automatically. Select the required units.
Thus, a passenger will be automatically assigned to a unit with the help of an RFID tag in case this unit has a special sensor configured in its properties and this unit is indicated in the automatic assignment list of the resource to which this passenger belongs.
Automatic assignment of passengers is removed in the same way: open the Automatic assignment dialog, select a resource, and clear the check boxes of units for which the automatic assignment will not be used.
To view the history of assignments and separations of the passenger, press the button to the right of its name. In the window that opens, specify the interval for which you want to see the history and click Show.
The following icons are used in the dialog box:
: In (entry);
: Out (unloading);
: Auto checkout (automatic separation in accordance with the value indicated in the passenger's properties).
The status of the passenger (except for the Auto checkout status) can be changed manually by clicking on the required icon. To remove the assignment or separation from the history, press the icon at the end of the required line.