Disclaimer: features differ based on Subscription Plan


This table shows the operation of the Counter type sensors. In the template, set the mask (filter) for sensors or select All sensorsThe table can include the columns described below.

Column

Description

Sensor

The name of the sensor.

Activated

The time of activation.

Deactivated

The time of deactivation.

Duration

The duration of the operation.

Total time

The time from the beginning of the first activation to the end of the last.

Location

The location at the moment of sending the data.

Mileage

The distance travelled for the operation period.

Mileage (adjusted)

Mileage subject to the coefficient set in the unit properties on the Advanced tab.

Avg speed

The average speed at this interval.

Max speed

The maximum speed at this interval.

Counter

The value of the counter meter (can be shown with an accuracy of hundreds, see General).

Geofences/Units

The column that includes the names of the geofences or units which were crossed during a given interval. The required geofences and units should be indicated in the filtration parameters. If at some interval there were several geofences or units like that, in the report there will be the name of the geofence with the smallest area or the name of the unit with the smallest radius of approximation. If the sizes coincide, all the names will be included.

Driver

The name of the driver (if available).

Trailer

The name of the trailer (if it was assigned).

Penalties

The penalties calculated for the adjusted Eco driving criteria.

Rank

The received penalty points converted into a 6-point rating system.

Notes

An empty column for your custom comments.



The mileage values are displayed in the table as fractional numbers. However, when exporting to an Excel file the values are rounded.


Interval filtration can be applied to this table: by duration, mileage, engine hours, speed range, trips, stops, parkings, sensors, drivers, fuel fillings, fuel thefts, and geofences/units.

The value of the counter sensor can be visualized in the chart that shows the operation intervals of the counter and its value. You can learn more about the charts here.

_scroll_external/attachments/counter1_en-a3652246903362af78481bc2171ce3877f50c765f066a1379c13b07250b2bad6.png

V 1.0.0