Disclaimer: features differ based on Subscription Plan
The Summary tabular report allows you to display a variety of generalizing data related to the reporting interval and, at the same time, not tied to any conditions (such as trips, sensor operation, geofence visits, etc.). In other words, the summary report processes all the messages for the indicated period, regardless of how long the unit worked and was in motion.
The table can include the columns described below.
Column | Description |
Mileage in trips | The mileage at the interval taking the trip detector into account. |
Mileage in all messages | The mileage for the reporting interval by the mileage counter. |
Mileage (adjusted) | The mileage in trips multiplied by the mileage coefficient. |
Avg speed | The average speed at the interval. |
Max speed | The maximum speed at the interval. |
Time in trips | The duration of trips |
Engine hours | The time of engine hours operation. |
Engine efficiency duration | The duration of operation of the attached implements (if there is an engine efficiency sensor). |
Parkings | The total time of parkings at the interval. |
Counter | The counter sensor value. |
Initial counter | The counter value at the beginning of the interval. |
Final counter | The counter value at the end of the interval. |
Avg value of custom sensor | The average value of a custom sensor at the interval. |
Min value of custom sensor | The minimum value of a custom sensor at the interval. |
Max value of custom sensor | The maximum value of a custom sensor at the interval. |
Initial value of custom sensor | The custom sensor value at the beginning of the interval. |
Final value of custom sensor | The value of the custom sensor at the end of the interval. |
Difference | The difference between the final and initial values of the custom sensor. |
Utilization | The percentage ratio of the duration of engine hours to the engine hours rate (engine hours divided by daily engine hours rate indicated in the unit properties on the Advanced tab). |
Useful utilization | The percentage ratio of the duration of engine efficiency to the engine hours rate. |
Productivity | The percentage ratio of the duration of engine efficiency to the engine hours duration. |
Consumed | The volume of consumed fuel detected by any sort of fuel sensor. If several such sensors are available, their values sum up. |
Consumed by... | The volume of consumed fuel detected by a fuel sensor (such as impulse/absolute/instant fuel consumption sensor, fuel level sensor) or calculated by math or rates. In the settings of the Summary table, you can select a parameter to calculate fuel: for the whole interval, in trips or in engine hours. |
Avg consumption | The average fuel consumption by all available fuel sensors. |
Avg consumption by... | The average fuel consumption by any fuel sensor or calculated by math or rates. |
Avg mileage per unit of fuel by... | The average mileage per unit of fuel based on the indications of a particular sensor. |
Initial fuel level | The fuel level at the beginning of the interval. |
Final fuel level | The fuel level at the end of the interval. |
Total fillings | The number of detected fuel fillings. |
Total thefts | The number of detected fuel thefts. |
Filled | The volume of filled fuel (only fuel fillings detected by a sensor). |
Stolen | The volume of stolen fuel. |
Penalties | The penalties calculated for the adjusted Eco driving criteria. |
Rank | The received penalty points converted into a grade using a 6-point scoring system. |
If there are several custom sensors, separate columns with average, minimum, maximum, initial and final values and difference are displayed for each of them. The name of each custom sensor and units of measurement (if they were specified when creating the sensor) are indicated next to the name of each of these columns within the parentheses. If required, you can indicate the name masks of custom sensors in the Interval filtration section of the Settings tab. |
Fuel can be calculated for the whole interval, in trips or in engine hours, which is selected in the additional parameters of the table. This option affects such columns as Consumed and Avg consumption.
As additional settings, you can specify masks for sensors (fuel, counters), including the engine hours sensor.
The Retrieve intervals option is available for this table if grouping by shifts is configured for it or if a value in the field Summary by: is selected.
The Summary table is presented by one row — the summarized data for a selected period of time. However, the report template parameters for this table contain an individual Summary by option. This option allows you to select a time interval (shifts/days/weeks/months) according to which the table data is arranged. This option can be used either in the reports for units or in reports for units groups.
Often a value received from the analog sensor may differ from the corresponding value in the Total row. It is stipulated by the analog data leaping, and application of grouping by days/weeks/months towards the values received as a result of processing such data. In other words, the analog data values (with or without leaps) are divided into intervals and then summarized. That is why the value of the summarized intervals can be sufficiently different from the value not divided into intervals. And since the values in the Total row are not divided into intervals, you can receive the difference compared to the values from the analog sensors. For example, calculating fuel, a value in the Consumed by FLS column may differ from the corresponding value in the Total row.
V 1.0.0
